Comments Off on Printer Says Offline? How to Fix It on Windows and Mac (Murrieta and Temecula Guide)
Printer Says Offline? How to Fix It on Windows and Mac (Murrieta and Temecula Guide)
Short answer: When a printer says “offline,” the computer can’t reach it. Restart the printer, your computer and your Wi-Fi router, make sure the printer is on the same network as your computer, turn off “Use Printer Offline” in the print queue, and clear any stuck print jobs. If it keeps going offline, the printer’s network address is probably changing, and giving it a fixed (reserved) IP address on your router usually stops it for good.
“Printer offline” is one of the most common calls we get from homes and small offices around Murrieta and Temecula, and it always seems to happen when you need to print something right now. The good news: most of the time it is a connection problem, not a broken printer. Work through these steps in order.
Step 1: Check the basics (it’s worth 2 minutes)
Is the printer on and awake? Some printers go into deep sleep. Press a button on the printer to wake it up.
Any error lights or messages? Paper jam, open door, low ink or empty toner can stop printing even when the connection is fine.
USB printer? Unplug the cable from both ends and plug it back in. Try a different USB port on the computer, and skip USB hubs if you can.
Wi-Fi printer? Look for the Wi-Fi light or the network status on the printer’s screen. If it’s blinking or off, the printer has lost the network.
Step 2: Restart everything, in the right order
Turn off the printer.
Restart your Wi-Fi router (unplug it, wait 30 seconds, plug it back in) and wait until the internet is working again.
Turn the printer back on and give it a minute to reconnect.
Restart your computer.
This order matters. The router hands out network addresses, so restarting it first lets the printer and computer reconnect cleanly.
Step 3: Make sure the printer and computer are on the same network
This trips up a lot of people. If your router has two network names (for example a 2.4 GHz and a 5 GHz name), a guest network or a mesh system, the printer and the computer might be on different ones. Many home printers only connect to 2.4 GHz Wi-Fi.
Print a network configuration page from the printer’s menu (often under Settings, Network or Wireless). It shows which network the printer is on and its IP address.
Compare that network name with the one your computer is using.
If the printer dropped off the network after you changed your Wi-Fi password or got a new router, run the printer’s wireless setup wizard again from its control panel or the manufacturer’s app.
Step 4: Fix it in Windows 11
Open Settings > Bluetooth & devices > Printers & scanners and click your printer.
Click Open print queue. In the queue window, open the Printer menu and make sure Use Printer Offline is not checked.
While you’re there, cancel any stuck documents. One jammed job can block everything behind it.
Back in the printer’s settings page, check that it’s the printer you’re actually printing to. Windows sometimes adds a second copy of the same printer (for example “Printer (Copy 1)”). The old copy may be offline while the new one works.
Restart the Print Spooler: press Windows + R, type services.msc, find Print Spooler, right-click it and choose Restart.
Still offline? Remove the printer from Printers & scanners and add it again with Add device. Installing the latest driver or app from the manufacturer’s website often helps too.
Step 5: Fix it on a Mac
Open System Settings > Printers & Scanners.
Select the printer and open the print queue. If printing is paused, click Resume, and delete any stuck jobs.
Remove the printer with the minus (–) button, then add it back with Add Printer, Scanner or Fax.
If nothing else works, Control-click in the printer list and choose Reset printing system. This removes all printers, so you’ll need to add yours back afterward.
Why your printer keeps going offline
If it works after a restart but goes offline again a few days later, the cause is usually one of these:
The printer’s IP address changed. Routers hand out addresses that can change after a restart or power outage. If your computer is looking for the old address, the printer shows offline. The fix is to set a DHCP reservation (a fixed address) for the printer in your router’s settings.
Weak Wi-Fi where the printer sits. Printers tucked in a back office or garage often have a poor signal. Moving the printer, adding a mesh point or using an Ethernet cable can fix it. Our business Wi-Fi and network support guide covers coverage problems in more detail.
Power-saving settings that put the printer to sleep too deeply.
Outdated printer firmware or drivers. Check the manufacturer’s site or app for updates.
When it’s more than a quick fix
Call for help if the printer shows offline on every computer in the office, if it keeps dropping after you’ve set a fixed address, if your printer is shared through a server, or if you’re seeing paper feed errors, streaks or mechanical noises. In an office, a printer that can’t be reached is often a sign of a bigger network issue that’s worth checking.
Frequently asked questions
Why does my printer say offline when it’s turned on?
Because “offline” means your computer can’t talk to it, not that it’s powered off. The printer may be on a different network, have a new IP address, or the queue may be set to “Use Printer Offline.”
Is it better to connect my printer by Wi-Fi or cable?
A USB or Ethernet cable is the most reliable. Wi-Fi is convenient and works well when the signal is strong and the printer has a reserved IP address.
Do I need to reinstall the printer driver?
Not always. Try the steps above first. Removing and re-adding the printer, with the latest driver from the manufacturer, fixes many stubborn cases.
Can you fix printers for small offices?
Yes. Shared office printers, scanners and the networks they sit on are part of the IT support we provide.
Printer still offline in Murrieta or Temecula?
A. Computer Doctor has helped homes and businesses in Murrieta, Temecula and surrounding cities since 2006. It was founded by Cesar Ramirez, a computer engineer with a B.S. from Cal Poly San Luis Obispo. If your printer won’t stay connected, we can find out whether it’s the printer, the computer or the network and fix it.